Specialised repair for DJI, Autel, XAG, and custom FPV drones. Fast turnarounds, OEM parts, 90-day warranty. Serving the Klang Valley and all of Malaysia via courier.

TechFix is Malaysia's independent drone repair laboratory. We use advanced micro-soldering, DJI Assistant 2 calibration software, and exhaustive flight testing to restore your drone to factory performance. From DJI Mavic 4 Pro to custom FPV quads, we handle every major brand and model.
OEM DJI, Autel, XAG, BetaFPV, iFlight, T-Motor, and precision electronic components.
Choose from our range of professional repair services for your Drone. Each repair includes expert diagnosis, quality parts, and a 90-day warranty.
Fix 'Gimbal Motor Overload' errors, torn PTZ ribbon cables, and bent yaw arms on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, and Avata 2. Our micro-soldering lab restores cinematic stability from RM 180 — most complete in 2-3 days with a 90-day warranty.
Resolve 'Vision Sensor Error' (18000 series) and restore DJI's obstacle avoidance on Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, and Avata 2. We replace cracked optical modules and run factory depth-map calibration. From RM 200.
Replace cracked folding arms, jammed brushless motors, and damaged ESC wiring on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, Avata 2, and custom FPV quads. From RM 150 — often completed same-day with a 90-day warranty and a full hover stability test before return.
Don't risk a mid-air propeller detachment. We replace damaged motor bells, stripped screw hubs, and failed locking mechanisms on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, Avata 2, and Neo. Full vibration balance test included. From RM 120.
Save hundreds by replacing just the lens or sensor instead of a whole camera module. We work on DJI Mavic 3/4 Pro Hasselblad, Mavic 3 Cine, Mini 3/4/5 Pro, Air 3S, and Avata 2. From RM 180.
If your drone motors stutter, cut out mid-flight, or the app blocks takeoff with 'ESC Status Error', the Electronic Speed Controller is blown. We repair or replace ESC boards on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, and Avata 2 with precision MOSFET-level rework. From RM 220.
Your drone won't power on, reboots mid-flight, or shows critical hardware faults? Our micro-soldering technicians repair DJI Mavic 3/4 Pro, Mini 3/4/5 Pro, Air 3S, and Inspire 3 logic boards at the IC level — saving you hundreds vs a full board swap. From RM 300.
Restore your drone's aerodynamics and factory appearance after a crash. We transfer the delicate internals into a brand-new top, middle, or bottom shell on DJI Mavic 3/4 Pro, Mini 3/4/5 Pro, Air 3S, and Avata 2. From RM 150.
Fix intermittent mid-air shutoffs and 'Battery Not Recognized' errors. We replace burnt battery terminal pins and the power delivery harness on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, and Avata 2. From RM 160.
Quick action saves drowned drones. We fully disassemble, ultrasonically clean, and perform board-level micro-soldering to resurrect DJI Mavic 3/4 Pro, Mini 3/4/5 Pro, Air 3S, and Avata 2 after pool, river, or salt-water exposure. ~70% recovery rate when brought in within 24 hours.
Fix dangerous drone drift and compass interference. We replace faulty GPS modules and ceramic antennas to restore satellite lock and precise Return-to-Home on DJI Mavic 3/4 Pro, Mini 4/5 Pro, Air 3S, and Avata 2. From RM 180.
Failed update, stuck in boot loop, or DJI Fly won't recognize your drone? We force-flash firmware via DJI Assistant 2 and engineering-level tools to recover bricked DJI Mavic, Mini, Air, Avata, and Neo drones. 95% success rate — most fixed same-day. From RM 100.
Hit a tree at 50 km/h? Fell from 100 metres? When a single repair isn't enough, we do full crash rebuilds — replacing the frame, gimbal, motors, and boards in one project. Save 60-80% vs buying new. Supported: DJI Mavic 3/4 Pro, Air 3S, Mini 4/5 Pro, Inspire 3, Matrice 30/350. From RM 500.
Keep your spray drones flying through harvest season. We service DJI Agras T10, T20, T20P, T30, T40, T50, and XAG P-series — pumps, nozzles, centrifugal discs, terrain-follow radar, and full spray system rebuilds. On-site field pickup for plantations. From RM 400.
Dropped your DJI RC Pro or Smart Controller? We replace cracked screens, broken gimbal sticks, burnt USB-C ports, and internal batteries on DJI RC 2, RC Pro, RC-N1, RC-N2, and the original Smart Controller. From RM 150.
From DJI Avata 2 and DJI FPV to custom 5" freestyle quads — we build, tune, and repair FPV drones. Stack resoldering, motor swaps, VTX fixes, and full Betaflight/BlueJay configuration. Supporting BetaFPV, iFlight, GEPRC, TBS, and Happymodel. From RM 200.
Common questions about Drone
Our team is here to help. Chat with us on WhatsApp for immediate assistance.
Chat on WhatsAppNot sure which service you need? Our technicians can diagnose your Drone for free.