DJI Drone Mainboard & Logic Board Repair Malaysia
Your drone won't power on, reboots mid-flight, or shows critical hardware faults? Our micro-soldering technicians repair DJI Mavic 3/4 Pro, Mini 3/4/5 Pro, Air 3S, and Inspire 3 logic boards at the IC level — saving you hundreds vs a full board swap. From RM 300.
FromRM300· final quote confirmed before repair
Request a technician-reviewed quote
Tell us your model and issue. We will confirm the final quote before repair.
Need it urgently? WhatsApp us to confirm current parts stock before visiting.
90-Day WarrantyCovers eligible parts and labourQuote before repairSunway workshop
Signs You Need DJI Mainboard Repair
Recognize these symptoms? Your device may need professional repair.
Dead Drone, No Power
Drone doesn't turn on even with a fully charged smart battery.
Overheats Mid-Flight
Drone gets alarmingly hot and shuts down during normal hover.
Core Board Error
App shows critical system failure or flight controller errors.
Experiencing any of these issues?
Book AssessmentOur Solution
Professional repair process using premium parts and expert technicians
Expert Diagnosis
Instead of a costly full-board replacement (usually RM 1,800-3,500 from DJI), we diagnose and replace the specific blown capacitor, burnt IC, or damaged PCB trace on the drone's dense multi-layer motherboard. Supported: DJI Mavic 3/4 Pro, Mavic 3 Classic, Mini 3/4/5 Pro, Air 3S, Avata 2, and Inspire 3.
Premium Parts
Premium ICs, tantalum capacitors, DJI-spec passives
Quality Guarantee
Eligible repairs include our 90-Day Warranty. Covers eligible parts and labour.
What's Included
Component-Level Diagnosis
IC & Capacitor Replacement
PCB Trace Repair
Thermal Paste Reapplication
❌
Before
- Damaged or malfunctioning device
- Reduced performance
- Frustration and downtime
- Risk of further damage
✅
After
- Fully functional device
- Restored to peak performance
- Peace of mind with warranty
- Premium quality parts
Transparent Pricing
No hidden fees. What we quote is what you pay. From RM 300.
Model / Service
Price
Warranty
Turnaround
DJI Mavic 4 Pro / Mavic 3 Pro Cine
Price:Custom Quote
Warranty:90-Day Warranty
Turnaround:3-5 Days
DJI Mavic 3 Pro / Mavic 3 Classic
Price:From RM 280
Warranty:90-Day Warranty
Turnaround:3-5 Days
DJI Mini 5 Pro / Mini 4 Pro
Price:From RM 180
Warranty:90-Day Warranty
Turnaround:2-3 Days
DJI Mini 3 Pro / Mini 3
Price:From RM 160
Warranty:90-Day Warranty
Turnaround:2-3 Days
DJI Air 3S / Air 3 / Air 2S
Price:From RM 220
Warranty:90-Day Warranty
Turnaround:2-3 Days
DJI Avata 2 / Avata / DJI FPV
Price:From RM 200
Warranty:90-Day Warranty
Turnaround:2-3 Days
DJI Neo
Price:From RM 150
Warranty:90-Day Warranty
Turnaround:1-2 Days
DJI Inspire 3 / Matrice 30 / Matrice 350
Price:Custom Quote
Warranty:90-Day Warranty
Turnaround:5-7 Days
Autel EVO Lite / Nano / Max 4T
Price:From RM 220
Warranty:90-Day Warranty
Turnaround:3-5 Days
Custom FPV (BetaFPV, iFlight, GEPRC)
Price:From RM 200
Warranty:90-Day Warranty
Turnaround:2-5 Days
Covers eligible parts and labour.
* Prices may vary based on specific model and condition. Contact us for exact quote.
Need it urgently? WhatsApp us to confirm current parts stock before visiting.
Our Repair Process
A streamlined process designed for your convenience and transparency.
1
Expert Diagnostic Assessment
Walk-in or courier drop-off. We run a multi-point diagnostic — flight log analysis, sensor tests, IMU check, physical damage inspection. RM150 diagnostic fee, fully waived once you approve the repair quote.
2-4 hours
2
Component-Level Testing
We isolate the failure to the exact module — gimbal, mainboard, ESC, motor, or battery — and decide repair vs replace. No guesswork, no parts cannon.
1 day
3
Precision Repair
Our micro-soldering technicians repair or replace components using OEM DJI parts where available. Every solder joint is inspected under microscope.
1-3 days
4
Flight & Stress Test
Hover test, GPS satellite lock test, compass calibration, IMU calibration, and gimbal stability check. We do not return a drone until it passes every airworthiness test.
2 hours
Ready to start your repair journey?
Book NowWhy Choose Techfix
Malaysia's trusted device repair specialists with a track record of excellence.
Expert Technicians
Our technicians are highly trained with years of hands-on experience in device repair.
90-Day Warranty
Covers eligible parts and labour
Same Day, Parts Permitting
Many common repairs can be done the same day once parts are in stock. Walk in or book ahead for priority service.
Sunway Service Centre
Visit us at Sunway Geo Avenue or courier your device to us — we courier it back free.
90
Day Warranty
1
Sunway Centre
Frequently Asked Questions
Common questions about DJI Drone Mainboard Repair
How much does DJI drone repair cost in Malaysia?
DJI drone repair in Malaysia starts from RM 100 for firmware recovery, RM 150-250 for motor, arm, or shell replacement on Mini and Air series, and RM 300-500 for mainboard, gimbal, or water damage work on Mavic 3/4 Pro. We provide a written quote before any repair begins. The RM150 diagnostic fee is waived in full when you approve the repair quote — no pressure.
Where can I repair a DJI Mavic or Mini drone in Kuala Lumpur?
TechFix operates a drone repair lab in Sunway (Bandar Sunway), with courier-in support for the Klang Valley and nationwide customers — courier your drone to us and we courier it back free. We specialize in DJI Mavic 3/4 Pro, Mini 3/4/5 Pro, Air 3S, Avata 2, Neo, Autel EVO, and custom FPV builds.
How long does drone repair take?
Most DJI Mini, Air, Avata, and Neo repairs complete in 2-3 days. Mavic 3/4 Pro repairs take 3-5 days. Firmware recovery is usually same-day. Full crash rebuilds and agriculture drones (DJI Agras, XAG) take 5-7 days. You receive a status update at every stage.
Do you use original DJI parts?
Yes. We source OEM DJI parts from authorized Malaysian vendors and salvaged factory units. For ribbon cables, gimbal modules, GPS antennas, and shells we use 100% original DJI components. Quality aftermarket alternatives are offered as a lower-cost option — clearly labeled so you always know what's in your drone.
Can you fix a drone that fell into the sea or a swimming pool?
Yes, and time is critical. Salt water corrodes drone boards within hours. Remove the battery immediately, do NOT try to power it on, and bring it to us within 24 hours. Our ultrasonic chemical bath plus board-level micro-soldering gives drones treated within one day the best chance of recovery.
Will I lose my flight logs or recorded footage during repair?
No. For standard hardware repairs, your flight logs stored in the aircraft and footage on your microSD card are preserved. For mainboard or NAND chip replacement work we quote data risk beforehand so you can extract footage first.
Still have questions?
Our team is here to help. Chat with us on WhatsApp for immediate assistance.
Chat on WhatsAppRelated Services
Other repairs we offer for your Drone
Visit Our Service Center
Walk in at Sunway Geo Avenue or book ahead for priority service.
Cyberjaya customers can courier their device to us — we courier it back free.
Techfix Sunway
Sunway Geo Avenue, Bandar Sunway
G-06-28, Level 6, Block G, Sunway Geo Avenue, Jalan Lagoon Selatan, Sunway South Quay, Bandar Sunway, 47500 Subang Jaya, Selangor
Mon - Fri: 9AM - 6PM
Ready to fix your Drone?
Book your dji mainboard repair today. Same-day service available at our Sunway location.
Need it urgently? WhatsApp us to confirm current parts stock before visiting.
No deposit needed • Free to book • Pay only when you collect your device
90-Day Warranty
Covers eligible parts and labour
Expert Technicians
Highly trained team
Data Privacy
Your data stays safe
Quality Parts
Premium components
Ready to Fix Your Drone?
Get professional dji mainboard repair service today. Same-day repairs available at Sunway.
Need it urgently? WhatsApp us to confirm current parts stock before visiting.
90-Day WarrantyCovers eligible parts and labour.