Our Repair Work

Cracked display from accidental drop — bright lines across upper half, backlight flickering on startup

Full OEM-grade LCD panel replaced. Display calibrated to factory colour profile. Bezel re-sealed.

Swollen battery causing trackpad to bulge upward. Device shutting down at 40% charge.

Swollen battery safely removed and replaced with OEM-spec 49.9Wh battery. Full cycle capacity restored.

Coffee spill — immediate shutdown, corrosion on logic board connectors, keyboard unresponsive in lower row

Ultrasonic cleaning of logic board, corrosion removed, keyboard flex cable re-seated. Full boot restored.

Shattered ProMotion OLED after drop — touch unresponsive in top-right corner, glass spider-webbed

Genuine-grade OLED panel installed. Face ID, ProMotion, True Tone all verified functional post-repair.

Battery health degraded to 72% — device throttling, unexpected shutdowns during video calls

OEM-spec 3,227 mAh battery fitted. Battery health now reads 100%. Performance throttling eliminated.

Cracked corner from bag compression — deep crack propagating from corner, touch dead in lower third

Liquid Retina XDR panel replaced. ProMotion, Apple Pencil hover detection and True Tone restored.

Spinning HDD boot times at 90 seconds — Fusion Drive spinning component failing, beachball every 5 minutes

2TB NVMe SSD installed via PCIe adapter. macOS cloned. Boot time reduced from 90 seconds to 12 seconds.

Dead pixel cluster in centre of display plus pressure marks — unusable for design work, ink spreading

PixelSense Flow display replaced. Pen digitiser recalibrated. Surface Type Cover re-validated.

Stuck 'E' and 'R' keys from liquid ingress — keys jamming mid-press, ghosting characters appearing

Full keyboard deck replaced. Backlight zones re-tested. 12-month keyboard warranty provided.

No-power fault after power surge — no charging indication, no POST, PPBUS_G3H rail at 0V

U3100 charging IC replaced under microscope. Power rails restored. All four Thunderbolt ports verified.

Frosted titanium-finish back glass shattered from waist-height drop — deep crack with colour bleed

Back glass panel replaced using precision heat-separation rig. Colour-matched finish. IP68 re-tested.

Loose display hinge — lid drooping when tilted beyond 90°, hinge bracket cracked at screw post

Both hinge assemblies replaced. Display cable re-routed. Lid now holds any angle 0–135° firmly.