Surface Water Damage
Recovery Experts
Specialized chemical cleaning and logic board microsoldering for Surface Pro, Laptop, and Book. We recover data and save devices others declare "dead".
Immediate Actions Required
Follow these steps immediately to maximize recovery chances. Do NOT use rice.
1. Turn Off Immediately
Force shutdown by holding power button for 20s. Do NOT try to turn it back on.
2. Disconnect Power
Unplug charger and any accessories immediately to prevent short circuits.
3. Drain & Dry
Place device in 'tent mode' (inverted V) on a towel to let liquid drain out.
4. Call Expert
Time is effectively motherboard life. Chemical corrosion starts in hours.
STOP!
Do NOT put it in rice.
Why Rice Destroys Your Surface
Rice does absorb moisture from the air, but it cannot pull water from inside a sealed Surface device. While the device sits in rice, the liquid inside is corroding the motherboard hour by hour. The starch dust also gets inside, creating a sludge that accelerates damage.
Professional Ultrasonic Cleaning is the only safe method.
The Cost of Waiting
Corrosion is a chemical reaction that never stops.
Critical
Liquid enters device, short circuit risk highest.
Severe
Chemical reaction begins, corrosion starts eating copper traces.
Damage Setting In
Corrosion hardens, components begin to fail permanently.
Low Success Rate
Extensive board damage likely, repair becomes much harder.
Our Recovery Protocol
Standardized, lab-grade chemical restoration process.
1. Diagnostic & Disassembly
Safe opening of display (critical for Surface) and logic board extraction.
2. Ultrasonic Bath
Components are submerged in specialized chemical solution to remove corrosion under chips.
3. Microsoldering
Replacing damaged capacitors, filters, and ICs under microscope.
Common Questions
Can a water damaged Surface be fixed?
Yes, in about 70-80% of cases IF brought in quickly. The key is stopping corrosion before it eats through logic board layers.
How much does it cost?
Diagnostic is free if we can't fix it. Successful logic board repairs typically range from RM 450 to RM 850 depending on model and damage severity.
Will I lose my data?
Our primary goal is data recovery. Unlike official centers that swap the device (wiping data), we repair the specific board to keep data intact.
Surface Got Wet?
Don't wait - every minute counts. Contact us now for emergency liquid damage recovery assistance.
Get Emergency Help Now